Macerating Pumps

Technical Data

Please note: tank sizes quoted are subject to a +/-3% variation.

Tank Name

Height

Width

Length

Dry Weight

Wet Weight*

Capacity

Name

000mm / 0'0"

000kgs / 000lbs

0000 Ltrs / 000 Glns

Name

000mm / 0'0"

000kgs / 000lbs

0000 Ltrs / 000 Glns

Name

000mm / 0'0"

000kgs / 000lbs

0000 Ltrs / 000 Glns

* Do not lift with liquid contents on board

Product Information

Why Plastic?

Plastic Flat Tanks will not corrode - no matter how long they are in use. Unsightly rust is a thing of the past

Plastic Flat Tanks are much lighter than steel tanks (110 kgs compared with 420 kgs for a 500 gallon tank)

With its lower weight, using a Flat Tank will actually reduce your costs: less fuel, smaller truck, lower cost of lifting equipment and labour

Plastic Flat Tanks reduce environmental impact: we use recycled material and help you reduce fuel use

Deliver and position Plastic Flat Tanks with far less effort, heavy equipment and expense than steel tanks

Plastic Flat Tanks are easy to clean and maintain a hygienic image

Technical Advantages

Large 12" waste access hatches (one either end) make for easier waste emptying and allow easy cleansing and sanitising after use

5" waste inlet ports allow easy connection to standard 4” waste outlets from toilets / showers / canteens etc.

All access points are supplied with screw on lids

Built in lifting handles and sling points

Non-removable, high contrast guidance instructions, date of manufacture and individual serial number

Upper surfaces are ribbed for strength and sloped so that rainwater will not collect

Increase volume by connecting several tanks together using our simple Linking Kits

Linkable in two directions (side by side in 'portrait' mode; nose to tail in 'landscape' mode)

Stackable (for transport and storage, when empty), rust-free and hygienic - flexibility is guaranteed

Not designed to be moved, lifted or stacked with liquid content on board

Standard, stock colour is grey but tanks can be produced in many colours, so why not match your corporate ID?

In the past years we've also produced Tuff Tanks in blue, black, yellow, red, orange and green

Modest, minimum order quantities may be applicable for a truly unusual colour: just ask us

Fleet numbers required? No problem: we can supply customised plates

Minimal spares requirement: and those spares you may require, we hold ex-stock

Applications

Construction sites

Events

Campsite / pleasure boat toilet waste tipping points

Wherever there is no mains sewer connection

When and Why to Use

WHEN AND WHY YOU SHOULD CHOOSE OUR PLASTIC TANKS TO COLLECT LIQUID WASTE

Our plastic, above ground effluent tanks will be suitable for some glamping applications and sites, but not all, we accept that. Our flat, slide under, low environmental impact tanks will be perfect for a range of applications where:

the glamping pod is nowhere near a mains sewer

you have planning permission for short-term use only

you have units built off the ground (e.g. shepherd’s huts) and you envisage occasionally moving

you will not be able to install underground septic tanks

you need to capture chemical toilet waste

Our robust, plastic effluent tanks solve many issues when capturing liquid waste: they are an excellent off grid solution.

Lifespan and Repairs

The oldest tanks we have supplied date back to 2010 and are still going strong. The product is rotationally moulded as a one-piece construction from UV-stabilised medium density polyethylene (MDPE) in a ribbed design for added strength. MDPE is particularly suitable for this application as it copes with temperature fluctuations, absorbs knocks, does not absorb smell from the (waste) contents and is easily cleaned. Repairs are rarely needed, but in the unfortunate event of damage, most repairs are readily carried out with a plastic welding tool, similar to a soldering iron.

Smells and Waste Levels

SMELLS - WASTE LEVELS - ELSAN® TIPPING POINTS

We supply a range of products ideal for large plastic or effluent tanks.

Recirc HD2 Clear, for example, is an all-round sanitiser and maintenance liquid additive, which kills bacteria, removes residues and cleanses the insides of tanks to reduce / eradicate unpleasant odours. This formaldehyde-free product has a pleasant berry perfume and is used in low concentrations (2-5 litres) as the tank is being used and/or as part of your yearly maintenance schedule, in a higher concentration (10 litres)

For a different solution, we also supply a breather kit which creates a flue effect and pulls air from the tank at a 3m height.

To control the waste tipped into holding tanks from portable, chemical toilets we offer an Elsan® Tipping Point

Waste levels can be controlled by visual check or by using a level alarm such as our Apollo Alarm

Septic Tanks or Main Sewage

WHEN YOU MIGHT USE SEPTIC TANKS OR MAINS SEWAGE?

Holiday parks specifically purpose-designed and/or glamping sites near to a mains sewer will readily be able to connect up to the waste outlets from glamping units. Septic tanks can be installed as an alternative solution but you will need to consult and apply for planning permission and be ready for groundworks, soakaway to a drain field (for which a “percolation test will be required) and ongoing maintenance charges.